Papers in the journals indexed in

  • Current Contents

     

  1. Torić, N., Brnić, J., Boko, I., Brčić, M.,   Burgess, I. W., Uzelac- Glavinić, I.; Development of a high temperature material model for grade S275JR steel, Journal of Constructional Steel Research 137 (2017), 161–168.
  2. Vukelić, G., Brnić, J.: Numerical Prediction of Fracture Behavior for Austenitic and Martensitic Stainless Steels, International Journal of Applied Mechanics 9 (2017), 4 , 1750052 (11 pages).
  3. Munjas, N., Čanađija, M., Brnić, J.: Thermo-Mechanical Multiscale Modeling in Plasticity of Metals Using Small Strain Theory, Journal of mechanics (2017) (prihvaćen)-
  4. Brnić, J., Kršćanski, S., Lanc, D., Brčić, M., Turkalj, G., Čanađija, M.,  Niu, J.: Analysis of the Mechanical Behavior, Creep Resistance and Uniaxial Fatigue Strength of Martensitic Steel X46Cr13,  Materials, 10 (2017), 4; 388-406.
  5. Čanađija, M., Brčić, M., Brnić, J.: Elastic properties of nanocomposite materials: influence of carbon nanotube imperfections and interface bonding, Meccanica, 52 (2017), 7; 1655-1668.
  6. Torić, N., Brnić, J.,  Boko, I., Brčić, M., Burgess, Ian W.; Uzelac, I.: Experimental Analysis of the Behaviour of Aluminium Alloy EN6082 AW T6 at High Temperature,  Metals,  7 (2017) , 4; 1-15.
  7. Brnic, J, Turkalj, G., Krscanski, S., Vukelic, G., Canadija, M.: Uniaxial Properties versus Temperature, Creep and Impact Energy of an Austentic Steel, High temperature materials and processes, 36 (2017), 2, 135-143.
  8. Brnić, J; Čanađija, M.; Turkalj, G.; Kršćanski, S.; Lanc, D.; Brčić, M. Zeng, G.: Short-Time Creep, Fatigue and Mechanical Properties of 42CrMo4-Low Alloy Structural Steel, Steel and Composite Structures, 22 (2016), 4, 875-888.
  9. Lanc, D., Turkalj, G., Vo, T. P., Brnić, J.: Nonlinear buckling behaviours of thin-walled functionally graded open section beams, Composite Structures, 152 (2016) ; 829-839.
  10. Brnić, J., Turkalj, G.,  Čanađija, M.,  Lanc, D.,  Kršćanski, S.,  Brčić, M., Li, Q.,  Niu, J.:  Mechanical Properties, Short Time Creep and Fatigue of an Austenitic Steel,  Materials, 9 (2016) , 4; 298-1-298-19.
  11. Vukelić, G., Brnić, J.: Predicted Fracture Behavior of Shaft Steels with Improved Corrosion Resistance,  Metals, 6 (2016) , 2; 40-1-40-9.
  12. Gao, Z., Chen, Z.R., Wu, Y. H., Niu, J., Brnić, J.: Structure and properties of welded joint of high-strength wear-resistant steel NM360, Material Science and Technology, 32 (2016), 4, 299.302.
  13. Vukelić, G., Brnić, J.: Analysis of Austenitic Stainless Steels (AISI 303 and AISI 316Ti) Regarding Crack Driving Forces and Creep Responses, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 230 (2016), 3, 699-704.
  14. Brnić, J., Turkalj, G., Krscanski, S., Niu, J., Li, Q.: Changes in the Material Properties of Steel 1.4762 Depending on the Temperature,  High temperature materials and processes, 35 (2016), 8, 761-767.
  15. Brnic J.,  Turkalj G.,  Canadija M.,   Krscanski S.,  Brcic M.,  Lanc D.,  .: Deformation Behavior and Material Properties of Austenitic Heat - Resistant Steel X15CrNiSi25-20 Subjected to High Temperatures and Creep, Materials and Design, 69 (2015), 219-229, DOI: 10.1016/j.matdes.2014.12.062.
  16. Brnic J.,  Turkalj G., Canadija M., Lanc D.,  Brcic M.: Study of the Effects of High Temperatures on the Engineering Properties of Steel 42CrMo4, High Temperature Materials and Processes, 34 (2015), 1, 27-34. DOI: 10.1515/htmp-2014-0011.
  17. Vukelic G., Brnic J.:Prediction of Fracture Behavior of 20MnCr5 and S275JR Steel Based on Numerical Crack Driving Force Assessment, Journal of Materials in Civil Engineering, 27 (2015), 3, 04014132-1 -  04014132-5  DOI: 10.1061/(ASCE)MT.1943-5533.0001071.
  18. Turkalj, G., Lanc, D., Brnić, J., Pešić, I.: A beam formulation for large displacement analysis of composite frames with semi-rigid connections, Composite structures 134 (2015), 237-246.
  19. Brnic J.,  Turkalj G.,  Krscanski S.,  Lanc D.,  Canadija M.,   Brcic M.: Information relevant for the design of structure -  ferritic-heat resistant high chromium steel X10CrAlSi25, Materials and Design, 63 (2014), 508-518, DOI: 10.1016/j.matdes.2014.06.051.
  20. Brnic J., Turkalj G., Canadija M.: Mechanical Testing of the Behavior of Steel 1.7147 at Different Temperatures, Steel and Composite Structures, 17 (2014), 5, 549-560.
  21. Brnic J.,  Turkalj G., Canadija M., Niu J.: Experimental determination and prediction of the mechanical properties of steel 1.7225, Materials Science and Engineering A, 600 (2014), 47–52.
  22. Brnic, J., Turkalj G., Lanc D., Canadija M., Brcic M., Vukelic G.: Comparison of material properties: Steel 20MnCr5 and similar steels, Journal of Constructional Steel Research 95 (2014), 81–89.
  23. Čanađija M., Guo X., Lanc D., Yang W., Brnić´ J.: Low cycle fatigue and mechanical properties of magnesium alloy Mg–6Zn–1Y–0.6Ce–0.6Zr at different temperatures, Materials and Design, 59 (2014), 287–295.
  24. Brčić, M., Čanađija, M., Brnić, J.: Estimation of material properties of nanocomposite structures, Meccanica, 48 (2013), 9, 2209-2220.
  25. Brnić, J., Turkalj, G., Niu, J., Čanadija, M.,   Lanc, D.: Analysis of experimental data on the behavior of steel S275JR – Reliability of modern design, Materials & Design, 47 (2013), 497-504.
  26. Brnić, J., Turkalj, G., Kršćanski S.: Experimental Research and Analysis of Non-alloy Structural Steel Response Exposed to High Temperature Conditions, High Temperature Materials and Processes, 32 (2013), 2, 163-169.
  27. Brnić, J; Vukelić, G., Turkalj, G.: Crack Driving Force Prediction Based on Finite Element Analysis Using Standard Models, Structural Engineering and Mechanics, 44(2012), 5., 601-609.
  28. Brnić, J., Turkalj, G., Čanađija, M., Lanc, D., Kršćanski, S.: Responses of Austenitic Stainless Steel American Iron and Steel Institute (AISI) 303 (1.4305) Subjected to Different Environmental Conditions, Journal of Testing and Evaluation, 40 (2012),  2, 319-328.
  29. Brnić, J., Turkalj, G., Vukelić, G., Brčić, M.: Analysis of the Dependence of Material Properties on Temperature – Steel 1.4122, High Temperature Materials and Processes, 31 (2012), 3, 259-266 .
  30. Niu, J., Luo, X., Tian, H., Brnić, J.: Vacum brazing of aluminium metal matrix composite (55 vol.%SiCp/A356) using aluminium –based filter alloy, Materials Science and Engineering:B , 177 (2012) , 19, 1707-1711 .
  31. Turkalj, G., Brnić, J., Lanc, D., Kravanja, S.: Updated Lagrangian formulation for nonlinear stability analysis of thin-walled frames with semi-rigid connections, International Journal of Structural Stability and Dynamics, 12 (2012),3, 1250013-01 – 1250013-23 (23 pages) .
  32. Brnić, J., Turkalj, G., Čanađija, M., Lanc, D.: AISI 316Ti (1.4571) Steel – Mechanical, Creep and Fracture Properties versus Temperature, Journal of Constructional Steel Research, 67 (2011), 12, 1948-1952 .
  33. Brnić, J., Turkalj, G., Čanađija, M., Lanc, D.: Loading and Responses of Austenitic Stainless Steels at Elevated Temperatures, High Temperature Materials and Processes, 30 (2011), 6, 579-586.
  34. Vukelić, G.; Brnić, J.: Pressure Vessel Steels Crack Driving Force Assessment Using Different Models, Journal of constructional steel research, 72 (2012), 29 – 34.
  35. Brnić, J., Turkalj, G., Čanađija, M., Lanc, D., Kršćanski, S.: Martensitic Stainless Steel AISI 420 - Mechanical Properties, Creep and Fracture Toughness, Mechanics of Time- Dependent Materials, 15 (2011), 4, 341-352 .
  36. Turkalj, G., Brnić, J., Kravanja, S.: A beam model for large displacement analysis of flexibly connected thin-walled beam-type structures, Thin-Walled Structures, 49 (2011), 8, 1007-1016.
  37. Brnić, J., Čanađija, M., Turkalj, G., Lanc, D., Brčić, M., Vukelić, G.: Effect of Elevated Temperatures on Behavior of Structural Steel 50CrMo4, High Temperature Materials and Processes, 30 (2011), 1-2, 121-125.
  38. Brnić, J., Čanađija, M., Turkalj, G., Lanc, D.: Structural Steel ASTM A709-Behavior at Uniaxial Tests Conducted at Lowered and Elevated Temperatures, Short-Time Creep Response and Fracture Toughness Calculation, Journal of Engineering Mechanics, 136 (2010), 9, 1083-1089.
  39. Čanađija, M., Brnić, J.: A dissipation model for cyclic non-associative thermoplasticity at finite strains, Mechanics Research Communications, 37(2010), 6, 510-514.
  40. Brnić, J., Čanađija, M., Turkalj, G., Lanc, D.: 50CrMo4 Steel-Determination of Mechanical Properties at Lowered and Elevated Temperatures, Creep Behavior and Fracture Toughness Calculation, Journal of Engineering Materials and Technology, 132 (2010), 2, 021004-1-021004-6.
  41. Brnic, J., Turkalj, G., Canadija, M.: Shear stress analysis in engineering beams using deplanation field of special 2-D finite elements, Meccanica, 45 (2010), 2, 227-235.
  42. Brnić, J., Čanađija, M., Turkalj, G., Lanc, D.: Behavior of  S 355JO Steel Subjected to Uniaxial Stress at Lowered and Elevated Temperatures and Creep, Bulletin of Materials Science, 33 (2010), 4, 475-481.
  43. Brnić, J., Lanc, D., Turkalj, G., Čanađija, M.: Comparison of Both Creep Resistance and Material Properties of HSLA Steel and Stainless Steel, Journal of Testing and Evaluation, 37 (2009), 4, 358-363.
  44. Brnić, J., Niu, J., Čanađija, M., Turkalj, G., Lanc, D.: Behavior of AISI 316L steel subjected to uniaxial state of stress at elevated temperatures, Journal of Materials Science and Technology, 25 (2009), 2, 175-180.
  45. Turkalj, G., Lanc, D., Brnić, J.: Large displacement analysis of elastic-plastic framed structures under creep regimes, International Journal of Structural Stability and Dynamics, 9 (2009), 1, 61-83.
  46. Turkalj, G., Brnić, J., Vizentin, G., Lanc, D.: Numerical simulation of instability behaviour of thin-walled frames with flexible connections, Materials Science and Engineering A, 499(2009), 74-77.
  47. Lanc, D., Turkalj, G., Brnić, J.: Large-displacement analysis of beam-type structures considering elastic-plastic material behavior, Materials Science and Engineering A, 499 (2009), 142-146.
  48. Čanađija, M., Brnić, J., Nonlinear kinematic hardening in coupled thermoplasticity, Materials Science and Engineering A, 499 (2009), 275-278.
  49. Brnić, J., Turkalj, G., Čanađija, M., Lanc, D.: Creep behavior of high-strength low-alloy steel at elevated temperatures, Materials Science and Engineering A, 499(2009), 23-27.
  50. Lanc, D., Turkalj, G., Brnić, J.: Finite-element model for creep buckling analysis of beam-type structures, Communications in Numerical Methods in Engineering, 24 (2008) , 11; 989-1008.
  51. Brnić, J., Čanađija, M., Turkalj, G., Lanc, D.: Finite element modeling and shear stress analysis of engineering structural elements, Proc. IMechE, Part G: J. Aerospace Engineering, 222(G6), (2008), 861-872.
  52. Turkalj, G., Brnić, J., Prpić – Oršić, J.: ESA formulation for large displacement analysis of framed structures with elastic – plasticity, Computers & Structures, 82 (2004), 23-26, 2001-2013.
  53. Turkalj, G., Brnić, J.: Nonlinear stability analysis of thin-walled frames using UL-ESA formulation, International Journal of Structural Stability and Dynamics, 4 (2004), 1, 45-67.
  54. Čanađija, M., Brnić, J.: Associative coupled thermoplasticity at finite strain with temperature-dependent material parameters, International Journal of Plasticity, 20 (2004), 10, 1851-1874.
  55. Brnić, J., Turkalj, G.: New finite elements in shear stress analysis of Saint – Venant’s torsional loaded beam structures, Journal of Materials Science and Technology, 19 (2003), 1, 151-153.
  56. Turkalj, G., Brnić, J., Prpić-Oršić, J.: Large rotation analysis of elastic thin-walled beam-type structures using ESA approach, Computers & Structures, 81 (2003), 18-19, 1851-1864.
  57. Turkalj, G., Brnić, J.: Analiza elastičnog izvijanja tankostijenih grednih konstrukcija s obzirom na velike rotacije, Strojarstvo,  42 (2000), 5- 6, 217-230.
  58. Brnić, J; Turkalj, G.; Čanađija, M.: Optimal design procedure based on viscoplastic material behaviour, Acta Metallurgica Sinica, 13 (2000) , 2; 587-592.
  59. Brnić, J.: Analiza stanja naprezanja poprečnih presjeka statički opterećenih grednih elemenata, Strojarstvo, 32(1990), 5, 325-330.
  60. Brnić, J.: Određivanje vlastitih vrijednosti slobodnih neprigušenih vibracija linijskih ravninskih konstrukcija, Strojarstvo, 27(1985), 3,139-143.
 
  • SCIENCE CITATION INDEX (SCI) & SCIEx)-u

  1. Vukelić, G., Brnić, J.: Numerically Predicted J-integral as a Measure of Crack Driving force for Steels 1.7147 and 1.4762, Journal of Theoretical and Applied Mechanics, 55 (2017), 2; 659-666.
  2. Vukelić, G., Brnić, J.: Marine Shaft Steels (AISI 4140 and AISI 5120) Predicted Fracture Toughness by FE Simulation, Materials Science-Medziagotyra, 23 (2017), 1, 16 -20.
  3. Banić, D., Turkalj, G., Brnić, J.: Finite Element Stress Analysis of Elastic Beams under Non-Uniform Torsion, TRANSACTIONS OF FAMENA, 40 (2016) , 2; 71-82.
  4. Brnic J.,Turkalj G., Niu J., Canadija M., Lanc D.: Significance of Experimental data in the design of structure made from 1.4057 steel, Journal of Wuhan University of Technology- Mater  Sci Ed, 29 (2014),  1, 131-136.
  5. Čanađija, M., Brčić, M., Brnić, J.: A Finite element model for thermal dilatation of carbon nanotubes, Reviews on advanced materials science, 33 (2013), 1,1-6.
  6. Brnić, J., Turkalj, G.,  Lanc, D., Čanadija, M., Brčić, M.,  Vukelic, G., Munjas, N.: Testing and Analysis of X39CrMo17-1 Steel Properties, Construction and Building Materials, 44 (2013), 293-301.
  7. Vukelić, G., Brnić, J., Brčić, M.: Numerical Assessment of Crack Driving Force for Two Types of Steels, TRANSACTIONS of FAMENA, 35 (2011), 4, 15-20.
  8. Brnic, J., Niu, J., Turkalj, G., Canadija, M., Lanc, D.: Behavior of HSLA A709 Steel at Different Environmental Conditions, Journal of Wuhan University of Technology-Mater. Sci. Ed., 25 (2010), 6, 897-902.
  9. Brnic, J., Niu, J.,Turkalj, G., Canadija, M., Lanc, D.: Experimental determination of  mechanical properties and short-time creep of AISI 304 steel at elevated temperatures, International Journal of Minerals, Metallurgy and Materials, 17 (2010), 1, 39-45.
  10. Brnić, J., Čanađija, M., Turkalj, G., Lanc, D.: Comparison of Mechanical Properties and Creep Responses of HSLA Steels, TRANSACTIONS of FAMENA, 33(2009),1, 23-30.
  11. Brnić, J., Čanađija, M., Turkalj, G., Lanc, D., Pepelnjak, T., Barišić, B., Vukelić, G., Brčić, M.:Tool Material Behavior at  Elevated Temperatures, Materials and Manufacturing Processes, 24 (2009), 1-5.
  12. Vukelić, G., Brnić, J., Čanađija, M., Turkalj, G., Brčić, M., Pešić, I.: Two- Dimensional Numerical Modeling of Pipelines with Axial Flaws, TRANSACTIONS of FAMENA, 32(2008), 1,1-7.
  13. Brnić, J., Čanađija, M., Turkalj, G., Lanc, D., Kršćanski, S.: Response of AISI 304 steel under uniaxial stress at elevated temperatures, TRANSACTIONS of FAMENA, 32(2008), 2, 3-10.
  14. Turkalj, G., Čehić, Z., Brnić, J.: A beam model for the buckling analysis of curved beam-type structures considering curvature effects, TRANSACTIONS of FAMENA, 30 (2007) , 1, 1-16.
  • SCOPUS,  Material Science Citation Index, Applied Mechanics Reviews, Zentralblatt Math, Cambridge Scientific Abstracts...

  1. Čanađija, M., Munjas, N., Brnić, J.: A multiscale approach to thermoplastic deformation, PAMM; 16 (2016), 1, 435-436.
  2. Brčić, M., Čanađija, M., Brnić, J.: Influence of Waviness and Vacancy Defects on Carbon Nanotubes Properties, Procedia Engineering 100 (2015) ; 213-219.
  3. Brnić, J., Brčić, M.: Comparison of Mechanical Properties and Resistance to Creep of 20MnCr5 Steel and X10CrAlSi25 Steel, Procedia Engineering 100 (2015) ; 84-89.
  4. Lanc, D., Bukša, M., Brnić, J.: Finite element simulation of thin-walled beam type-structure buckling under creep regime, International virtual journal for science, technics and innovations for the industry MACHINES, TECHNOLOGIES, MATERIALS 2 (2014) ; 11-14.
  5. Brčić, M., Čanađija, M., Brnić, J.: Multiscale Modeling of Nanocomposite Structures with Defects, Key Engineering Materials, 577-578 (2013) ; 141-144.
  6. Brnić, J., Niu, J., Turkalj, G., Čanađija, M., Lanc, D., Brčić, M., Kršćanski, S., Vukelić, G.: Comparison of Material Properties and Creep Behavior of 20MnCr5 and S275JR Steels, Materials Science Forum, 762 (2013), 47-54.
  7. Čanađija, M., Brčić, M., Brnić, J.: Bending behaviour of single-layered graphene nanosheets with vacancy defects, Engineering Review, 33 (2013), 1, 9-14.
  8. Vukelić, G., Brnić, J.: J-Integral As Possible Criterion In Material Fracture Toughness Assessment, Engineering review, 31 (2011) , 2; 91-96.
  9. Brčić, M., Čanadija, M., Brnić, J.,  Lanc, D., Kršćanski, S., Vukelić, G.: FE modelling of multi-walled carbon nanotubes, Estonian Journal of Engineering, 15 (2009), 2, 77–86.
  10. Čanađija, M., Brnić, J.: Solution strategies for nonlinear coupled thermomechanical problems. Scientific Bulletin of the 'Politehnica' University of Timisoara, Transactions on Mathematics & Physics, 51(65) (2007) , 2, 33-40.
  11. Brnić, J., Vukelić, G., Brčić, M.: Discrete optimization of a platform for a given loads, Bulletins for Applied & Computer Mathematics, Budapest, 2007., pp.075-080.
  12. Brnić, J., Čanađija, M., Lanc, D., Vukelić, G.: Thin-walled panel finite elements in shearing stress analysis of thin walled beam-type structures. Scientific Bulletin of the 'Politehnica' University of Timisoara, Transactions on Mathematics & Physics, 52(66) (2007) , 1,1-7.
  13. Brnić, J., Čanađija, M., Turkalj. G., Lanc, D.: Response of stainless steel at elevated temperature – short time creep tests and numerical model, Bulletins for Applied & Computer Mathematics, Budapest, 2007., pp.081-086.
  14. Brčić, M., Čanađija, M., Brnić, J.: Structural model of single walled carbon nanotube, Bulletins for Applied & Computer Mathematics, Budapest, 2007., pp. 067-074.
  15. Brnić, J., Čanađija, M., Turkalj, G., Lanc, D.: Finite Element Panel Method in Beams Shearing Stress Analysis, Masinostroene, Sofija, Bugarska, LIV(2005), pp. 76-79.
  16. Čanađija, M., Brnić, J.: Finite Element Analysis and Optimization of Sandwich Structures in Naval Industry, Masinostroene, Sofija, Bugarska, LIV(2005), pp. 42-45
  17. Čanađija, M., Brnić, J., Brčić, M: Application of a Contact Model in Thermoplastic Problems, Bulletins for Applied & Computer Mathematics, Budapest, 2006, pp. 076-082.
  18. Brnić, J., Čanađija, M., Turkalj, G., Vukelić, G.: Comparison of Numerical and Analytical Solutions in Bulkheads Plastification, Bulletins for Applied & Computer Mathematics, Budapest, 2006, pp. 068-075
  19. Brnić, J., Čanađija, M., Turkalj, G., Lanc, D.: Application of special 2-D triangular finite elements in analysis and design of thin-walled beam type structures, Mašinostroene, Sofia, 2005, pp. 37-40.
  20. Čanađija, M., Brnić, J.: A note on exact and approximative tangent matrices in finite strain thermoplasticity, Bulletins for Applied & Computer Mathematics, Budapest, 2005., pp. 7-14.
  21. Turkalj, G., Lanc, D., Brnić, J.: Buckling analysis of beam structures using Eulerian approach, Bulletins for Applied & Computer Mathematics, Budapest, 2005., pp. 15-20.
  22. Brnić, J., Turkalj, G., Čanađija, M., Lanc, D.: Structure life time prediction based on fracture mechanics concepts, Bulletins for Applied & Computer Mathematics, Budapest, 2005., pp. 1-6.
  23. Lanc, D., Turkalj, G., Brnić, J.: Linear stability analysis of shear-flexible thin-walled beams, Proceedings of the Estonian Academy of Sciences. Engineering, Vol. 10, No. 4, 2004, pp. 281-289.
  24. Čanađija, M., Brnić, J.: Coupled thermoplasticity with temperature dependent properties, Journal of the Mechanical Behavior of Materials, 2004, pp. 419-426.
  25. Turkalj, G., Brnić, J., Čehic, Z.: Finite Element Analysis of Curved Beam Stability Problems, Bulletins for Applied & Computer Mathematics, Budapest, 2004., pp. 25-30.
  26. Turkalj, G., Brnić, J., Vizentin, G.: Finite Element Model for Initial Stability Analysis of Semi-Rigid Frames, Bulletins for Applied & Computer Mathematics, Budapest, 2004., pp. 33-38.
  27. Turkalj, G., Lanc, D., Brnić, J.: An Algorithm in Computer Stability Anaylsis of Elastic Thin-Walled Beam Structures, Bulletins for Applied & Computer Mathematics, Budapest, 2004., pp. 41-46.
  28. Čanađija, M., Brnić, J.: Modelling of Cyclic Processes in Thermoplasticity, Bulletins for Applied & Computer Mathematics, Budapest, 2004, pp. 03-10.
  29. Brnić, J., Turkalj, G., Čanađija, M.: Application of finite element structural optimization in naval architecture, Bulletin of Politehnica University of Timisoara -Transactions on Mathematics & Physics, Timisoara-Romania, 2003., pp 353-365.
  30. Brnić, J., Turkalj, G., Čanađija, M.: Structural optimization based on viscoplastic constraints, Bulletins for Applied & Computer Mathematics, Budapest, 2003., pp. 451-460.
  31. Čanađija, M., Brnić, J.: Numerical simulation of necking process, Bulletins for Applied & Computer Mathematics, Budapest, 2003, pp. 017-024.
  32. Brnić, J., Turkalj, G., Roščić, S.: A general framework of a unique optimum, Bulletins for Applied & Computer Mathematics, Budapest, 2003, pp. 9-15
  33. Lanc, D., Brnić, J., Turkalj, G.: Finite element modeling creep material behaviour, Bulletins for Applied & Computer Mathematics, Budapest, 2002, pp. 481-488.
  34. Brnić, J., Turkalj, G., Roščić, S.: Numerical modeling of free vibration response of open thin walled structures, Bulletins for Applied & Computer Mathematics, Budapest, 2002, pp. 489-496.
  35. Turkalj, G., Brnić, J.; Thin-walled beam element for analysis of large displacement problems, Bulletins for Applied & Computer Mathematics, Budapest, 1999, pp. 15-24.
  36. Brnić, J., Čanađija, M.: Additive and multiplicative strain decomposition in large strain elastoplastic response, Bulletins for Applied & Computer Mathematics, Budapest, 1999, pp. 7-14.
  37. Turkalj, G., Brnić, J.: Computational non-linear analysis of structural stability, Bulletins for Applied & Computer Mathematics, Budapest, 1999, pp. 15-24.
  38. Brnić, J. Čanađija, M.: Computer based solution in engineering contact problems, Bulletins for Applied & Computer Mathematics, Budapest, 1999, pp. 7-14.
  39. Turkalj, G., Brnić, J.: Finite element analysis of purely torsional buckling of thin-walled structures caused by uniform axial compression, Bulletins for Applied & Computer Mathematics, Budapest, 1998, pp. 079-086
  40. Brnić, J., Turkalj, G.: Finite element formulation of flattening process as plane-strain problem, Bulletins for Applied & Computer Mathematics, Budapest, 1998, pp. 249-260
  41. Turkalj, G., Brnić, J.: Numerical comparable stability analysis of thin-walled beam structures for different cross-sectional shapes, Bulletins for Applied & Computer Mathematics, Budapest, 1998., pp. 91-98.
  42. Brnić, J., Čanađija, M.: Finite element nonlinear analysis of a special rolling problem, Bulletins for Applied & Computer Mathematics, Budapest, 1998., pp. 83-90.
  43. Brnić, J. Turkalj, G.: Wrinkling and Euler Buckling, Bulletins for Applied & Computer Mathematics, Budapest, 1997., pp. 11-20.
  44. Brnić, J., Turkalj, G., Čanađija, M.: Numerical determination of geometrical properties based on creep behaviour prediction, Bulletins for Applied & Computer Mathematics, Budapest, 1997., pp. 21-28.
  45. Brnić, J., Čanađija, M.: Mechanical sublayer method in creep and relaxation phenomena numerical modelling, Bulletins for Applied Mathematics, Budapest, 1996., pp. 295-306.
  46. Brnić, J., Turkalj, G.: Structural optimization via plastic design criteria, Bulletins for Applied Mathematics, Budapest, 1996., pp. 19-28.
  47. Brnić, J.: Constitutive equations of viscoelastic models, Elektrotechnik und Informationstechnik, (4/1996 - Automation und Messtechnik), Spinger-Verlag, Wien/New York, 1996., pp. 263-265.
  48. Brnić, J., Turkalj, G.: Numerical and experimental stability analysis of frames with freely rotate members about the pin axis, Bulletins for Applied Mathematics, Budapest, 1996., pp. 115-124.
  49. Brnić, J.: Modelling of time-rate effects in elasto-viscoplastic problems, Bulletins for Applied Mathematics, Budapest, 1996., pp. 191-200.
  50. Turkalj, G., Brnić, J.: Numerical analysis of the initial stability of plane frames, Bulletins for Applied Mathematics, Budapest, 1995., pp. 53-62.
  51. Brnić, J.: Numerical determination of shear center location, Bulletins for Applied Mathematics, Budapest, 1995., pp. 9-16.
  52. Brnić, J.: Numerical determination of section properties of beam-type structures based on the cross-sectional warping, Engineering Mechanics (Journal for theoretical and applied mechanics), No. 6, Vol. 2, Brno, 1995., pp. 357-366.
  53. Brnić, J., Turkalj, G.: Plastic zones and limit load, Bulletins for Applied Mathematics, Budapest, 1995., pp. 331-340.
  54. Brnić, J.: Stress and strain analysis of viscoelastic bodies using viscoelastic models, Bulletins for Applied Mathematics, Budapest, 1995., pp. 119-128.
  55. Brnić, J.: Numerical stress analysis of beam loaded by bending with shear, Bulletins for Applied Mathematics, Budapest, 1994., pp. 29-38.
  56. Brnić, J.: Numerical structural analysis of Saint-Venant's torsion problem, Bulletins for Applied Mathematics, Budapest, 1994., pp. 245-258.
  57. Brnić, J., Traven, F. : A contribution to the solution of stability of reinforced plates, Bulletin for Applied Mathematics, Budapest, 1987., pp.157-165.
  58. Brnić, J., Traven, F.: Evaluation of the proper values of undamped vibrations of plane constructions, Bulletins for Applied Mathematics, Budapest, 1987., pp. 131-140.
  59. Brnić, J.: Važnost strukturalne analize s gledišta minimizacije mase pri projektiranju pojedinih dijelova podvodnih objekata, Brodogradnja, 34 (1986)6, Zagreb, 1986., 311-315.

 

  • Papers in Proceedings of International scientific meetings:

  1. Torić, N., Burgess, I. W., Brnić, J., Boko, I.,  Turkalj, G.,  Čanađija, M., Harapin, A.,  Divić, V.,  Uzelac, I.: A unified rheological model for analysis of steel behaviour at high temperature,  Structures in Fire, Proceedings of the Ninth International Conference / Moreyra Garlock, Maria E. ; Kodur, V.K.R. (ur.), Lancaster, Pennsylvania : DEStech Publications, Inc., 2016., 1008-1015.
  2. Brčić, M., Čanađija, M., Brnić, J.: Influence of Imperfections on Mechanical Properties of Carbon Nanotube Reinforced Polymer Matrix Nanocomposites, Proceedings of the 8th International Congress of Croatian Society of Mechanics / Kožar, Ivica ; Bićanić, Nenad ; Jelenić, Gordan ; Čanađija, Marko (ur.), Opatija, Croatia, 2015.
  3. Munjas, N., Čanađija, M., Brnić, J.: Thermo-mechanical multiscale modeling in plasticity of metals,  Proceedings of the 8th International Congress of Croatian Society of Mechanics / Kožar, Ivica ; Bićanić, Nenad ; Jelenić, Gordan ; Čanađija, Marko (ur.), Opatija, Croatia, 2015.
  4. Vukelić, G.,  Brnić, J.: Mechanical Properties Determination and Crack Behavior Prediction for Steels 1.4057 and 1.7225, Proceedings of the 8th International Congress of Croatian Society of Mechanics / Kožar, Ivica ; Bićanić, Nenad ; Jelenić, Gordan ; Čanađija, Marko (ur.)., Opatija : Croatian Society of Mechanics, 2015, 106-107.
  5. CHENG, D.,  NIU, J.,  GAO, Z., Brnić, J.: Elements Diffusion in Brazing Seam of High Volume Fraction SiCp/6063Al Matrix Composites, Proceedings of International Conference on Frontiers in Materials Processing, Application, Research and Technology (FiMPART 15).
  6. Brnić, J., Turkalj, G., Vukelić, G.: Importance of Experimental Research in the Design of Structures, Proceedings of the 23rd International Symposium, Katalinić, Branko (ur.), Vienna: DAAAM International, 2012, 147-150.
  7. Turkalj, G., Brnić, J., Merdanović, E., Munjas, N.: Numerical model for nonlinear stability analysis of spatial frames with semi-rigid connections , Proceedings of the 23rd International Congress of Theoretical and Applied Mechanics / Bai, Yilong ; Wang, Jianxiang ; Fang, Daining (ur.), Beijing : The International Union of Theoretical and Applied Mechanics & The Chinese Society of Theoretical and Applied Mechanics, 2012, SM14-014.
  8. Vukelić, G., Brnić, J.: Comparison of Materials Fracture Resistance Based on J-criterion, Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium / Katalinić, Branko (ur.).,Beč : DAAAM International Vienna, 2011, 1411-1412.
  9. Turkalj, G., Brnić, J., Lanc, D.: Numerical model for large displacement analysis of elastic-plastic frames with semi-rigid connections , Proceedings of ICPNS'2010 / Niu, Jitai (ur.), Guilin : Chinese Mechanical Engineering Society, 2010,CDROM.
  10. Lanc, D., Pešić, I., Turkalj, G., Brnić, J.: FE model for composite beam-type structure buckling analysis , Proceedings of ICPNS'2010 / Niu, Jitai (ur.). Guilin : Chinese Mechanical Engineering Society, 2010, CDROM.
  11. Brnić, J.: Properties Comparison of Two Constructural Steels: ASTM A505 and ASTM A709 , Annals of DAAAM for 2010& PROCEEDINGS / Branko Katalinić (ur.), Vienna : DAAAM International Vienna, 2010, 85-86.
  12. Vukelić, G.; Brnić, J.; Kršćanski, S.: Finite Element Analysis of Crack Size Effect on Fracture Criterion as a Measure of Fracture Toughness of Pressure Vessel Materials, Proceedings of The Sixth International Conference on Physical and Numerical Simulation of Materials Processing, ICPNS 2010, Guilin, China, CDROM.
  13. Brnić, J., Čanađija, M., Turkalj, G., Lanc, D.: Uniaxial tests of 50CrMo4 steel at lowered and elevated temperatures and impact notch energy determination , ESMC 2009, 7th EUROMECH Solid Mechanics Conference. Lisboa, Portugal, 2009, CDROM.
  14. Brnić, J., Turkalj, G., Čanađija, M., Lanc, D.: Behavior of high strength low-alloy(HSLA)steel at elevated temperatures, Proceedings of The Fifth International Conference on Physical and Numerical Simulation of Material Processing, Zhengzhou : The Chinese Mechanical Engineering Society, 23.-27. October 2007.
  15. Turkalj, G., Vizentin, G., Brnić, J: Hybrid beam element for stability analysis of semi-rigid frames, Proceedings of the 5th International Congress of Croatian Society of Mechanics, 21.-23. September 2006, Trogir, CDROM.
  16. Lanc, D., Turkalj, G., Brnić, J.: Beam model for creep buckling analysis, Proceedings of the 5th International Congress of Croatian Society of Mechanics, 21.-23. September 2006, Trogir, CDROM.
  17. Lanc, D., Turkalj, G., Brnić, J.: Beam element for creep analysis for a large displacement regime, Proceedings of the Eighth International Conference on Computational Structures Technology, Las Plamas de Gran Canaria, Španjolska, 12-15. September 2006.,CDROM.
  18. Čanađija, M., Brnić, J.: Solution Strategies for Nonlinear Coupled Thermomechanical Problems, The 11th International Symposium of Mathematics and its Applications, 2.-5. November 2006, Timisoara, Rumunjska.
  19. Čanađija, M., Brnić, J.: A Model for Cyclic Finite Strain Thermoplasticity, Proceedings of the 5th International Congress of Croatian Society of Mechanics, 21.-23. September 2006, Trogir, CDROM.
  20. Čanađija, M., Brnić, J.: Analysis of Thermal Stresses in Beams: Comparison of Finite Element and Analytical Solutions, Kittner, R. (ur.), Proceedings of the 5th International Conference of DAAAM Baltic Industrial Engineering – Adding Innovation Capacity of Labour Force and Entrepreneur, DAAAM Baltic, Tallinn, Estonija, 20.-22. April 2006,  19-24.
  21. Lanc, D., Tukralj, G., Brnić, J.: Geometrically nonlinear analysis of elastic thin-walled beam structures using Eulerian approach, Proceedings of the Third International Conference on Advanced Computational Methods in Engineering ACOMEN 2005, Ghent, Belgium, May 30- June 2, 2005, CD-ROM.
  22. Čanađija, M., Brnić, J.: Numerical modlling of thermoplastic behaviour of metals under cyclic loading, 3rd International Conference on Computer Aided Design and Manufacturing, CADAM 2005, Šibenik, September 27-October 1, 2005,  11-13.
  23. Čanađija, M., Brnić, J.: Coupling in finite strain thermoplasticity, 2nd International Conference on Computer Aided Design and Manufacturing, CADAM 2004, Šibenik, September 28-October 1, 2004,  13-14.
  24. Čanađija, M., Brnić, J.: Influence of temperature dependency of material properties in coupled thermoplasticity, Proceedings of the 4th European Congress on Computational Methods in Applied Sciences and Engineering, Volume 1, Jyväskylä/Finland, July 24-28, 2004., CDROM.
  25. Turkalj, G., Lanc, D., Brnić, J.: Stability analysis of thin-walled frames using a shear-flexible beam element, Proceedings of the seventh international conference on computational structures technology, Lisbon/Portugal, September 7-9, 2004,  569-570.
  26. Turkalj, G., Brnić, J., Lanc, D.: Flexural – torsional stability analysis of thin – walled beams, Proceedings of the 4th International Conference on Physical and Numerical Simulation of Material Processing ( ICPNS 2004 ) Shanghai / China , May 17-21, 2004., CDROM.
  27. Čanađija, M., Brnić, J.: Application of finite element method in thermomechanics, International DAAAM Proceedings of the 4th International Conference Industrial Engineering – New Challenges to SME, Tallinn, Estonia, April 29-30, 2004,  16-19.
  28. Brnić, J., Turkalj, G., Čanađija, M., Roščić, S.: Pressure vessel optimal design based on viscoplastic material response, Workshop, Optimal Design of Materials and Structures, November 26-28, 2003, Palaiseau, France, Proceedings, CD-ROM.
  29. Brnić, J., Turkalj, G., Čanađija, M.: Optimal design of dump truck body based on finite element model, Proceedings of the international conference Motauto ’03, Vol. 2, Automobiles, tractors and industrial trucks, Sofia, Bulgaria, October 01-02, 2003, 6-8.
  30. Brnić, J., Turkalj, G., Čanađija, M., Lanc, D.: Shape and layout optimisation of plate girders, Proceedings of the 14th International DAAAM Symposium - Intelligent Manufacturing & Automotion: Focus on Reconstruction and Development, Sarajevo, BiH, October 22-25, 2003,  067-068.
  31. Turkalj, G., Brnić, J., Lanc, D.: Large displacement formulation for elastic-plastic space frames, Proceedings of the 4th International Congress of the Croatian Society of Mechanics, Bizovac, Croatia, September 18-20, 2003,  539-546.
  32. Čanađija, M., Brnić, J.: Finite plastic straincs within nonisothermal context, Proceedings of the 4th International Congress of the Croatian Society of Mechanics, Bizovac, Croatia, September 18-20, 2003,  97-104.
  33. Brnić, J., Čanađija, M., Turkalj, G., Lanc, D.: Finite strain elastoplasticity in isothermal metal forming process, Proceedings of the 4th International Conference on Industrial Tools, ICIT 2003, Maribor, Slovenia, April 08-12, 2003.,  395-398.
  34. Roščić, S., Brnić, J., Čehić, Z.: Free vibration model of thin walled beam applied to vehicle structures, Proceedings Motauto ’02, Vol. 2, Automobiles, tractors and industrial trucks, Russe, Bulgaria, October 29-31, 2002,  41-44.
  35. Brnić, J., Turk, A., Čanađija, M.: Stress distribution in high beam vehicle structure elements like bulkheads based on three different methods of stress analysis, Proceedings Motauto ’02, Vol. 2, Automobiles, tractors and industrial trucks, Russe, Bulgaria, October 29-31, 2002,  27-30.
  36. Čanađija, M., Brnić, J., Turkalj, G.: Shape optimisation in structural thermomechanics with application to pipeline layout problems, Annals of DAAAM for 2002 & Proceedings of the 13th International DAAAM Symposium, Vienna, Austria, October 23-26, 2002,  077-078.
  37. Brnić, J., Turkalj, G., Roščić, S.: Optimization of thin walled beam cross-section dimensions using stability criteria, Workshop, Optimal Design of Materials and Structures, November 25-27, 2002, Palaiseau, France, (Proceedings, CD-ROM).
  38. Turkalj, G., Brnic, J., Prpic-Oršic, J.: Updated Lagrangian formulation using ESA approach in large rotation problems of thin-walled beam-type structures, Proceedings of the Eighth International Conference on Civil & Structural Engineering Computing, Eisenstadt-Vienna, Austria, September 19-21, 2001, (CD-ROM).
  39. Turkalj, G., Brnic, J., Prpic-Oršic, J.: External stiffness approach for thin-walled frames with elastic-plasticity, Proceedings of the Sixth International Conference on Computational Structures Technology, Prague, Czech Republic, September 4-6, 2002, (CD-ROM).
  40. Tukralj, G., Brnic, J.: Incremental stability analysis of elastic thin-walled beam structures using updated Lagrangian formulation, Proceedings of the Second International Conference on Advanced Computational Methods in Engineering ACOMEN 2002, Liege, Belgium, May 28-31, 2002, (CD-ROM).
  41. Turkalj, G., Brnic, J.: Finite element model for pre- & post-spatial buckling analysis of elastic beams and frames accounting for restrained warping and large rotations, 15th Nordic Seminar on Computational Mechanics NSCM 15, Aalborg, Denmark, October 18-19, 2002,  233-236.
  42. Turkalj, G., Brnić, J., Čanađija, M.: Incremental formulation in finite element stability analysis of thin-walled framed structures, Annals of DAAAM for 2001 & Proceedings of the 12th International DAAAM Symposium Intelligent Manufacturing & Automation: Focus on Precision Engineering, Jena, Germany, October 24-27, 2001,  489-490.
  43. Turkalj, G., Brnić, J., Prpić-Oršić, J.: Updated Lagrangian formulation using ESA approach in large rotation problems of thin-walled beam-type structures, Proceedings of The Eighth International Conference on Civil & Structural Engineering Computing, Eisenstadt-Vienna, Austria, September 19-21, 2001,  189-190.
  44. Turkalj, G., Brnić, J., Prpić-Oršić, J.: Lateral buckling analysis using finite element method, 8th International Scientific Conference CO-MAT-TECH 2000, Trnava, Slovakia, 19-20 October 2000, 185-190.
  45. Čanađija, M., Brnić, J., Turkalj, G.: Finite element analysis of rolling process, Annals of DAAAM for 2000 & Proceedings of the 11th International DAAAM Symposium Intelligent Manufacturing & Automation: Man – Machine - Nature [Org.: DAAAM International Vienna; University of Rijeka; Vienna University of Technology; ÖIAV 1848 Austrian Society of Engineers and Architects], Opatija, October 19-21, 2000,  059-060.
  46. Brnić, J., Lanc, D., Turkalj, G., Čanađija, M.: Viscoplastic analysis of energetic equipment members using finite element method, Zbornik radova 5. međunarodnog simpozija Dijagnostika električnih strojeva, transformatora i uređaja & Kvaliteta električne energije EEDEEQ’2000, Rovinj, 2.-3. listopada 2000.,  3-6.
  47. Turkalj, G., Brnić, J., Čanađija, M.: Non-linear thin-walled beam model for torsional-flexural analysis, Proceedings of the 3rd International Congress of Croatian Society of Mechanics [Org.: Croatian Society of Mechanics; Central European Association for Computational Mechanics CEACM], Cavtat – Dubrovnik, September 28-30, 2000,  317-324.
  48. Čanađija, M., Brnić, J., Lanc, D.: Mixed finite element formulations in metal forming modelling, Proceedings of the 6th International Design Conference DESIGN 2000, Dubrovnik, May 23-26, 2000, 521-526.
  49. Brnić, J., Turkalj, G., Prpić-Oršić, J.: Numerical modelling of buckling of thin-walled beam members considering large rotations, Proceedings of the 6th International Design Conference DESIGN 2000, Dubrovnik, May 23-26, 2000,  275-280.
  50. Turkalj, G., Brnić, J., Čanađija, M.: Finite element spatial stability analysis of thin-walled structures, Proceedings of the 10th International DAAAM Symposium "Intelligent Manufacturing & Automation: Past - Present - Future", October 21-23, Vienna, 555-556.
  51. Brnić, J., Čanađija, M., Turkalj, G.: Friction layer technique in rolling manufacturing problem, Proceedings of the 10th International DAAAM Symposium "Intelligent Manufacturing & Automation: Past - Present - Future", October 21-23, Vienna, 1999, 61-62. 6
  52. Čanađija, M., Brnić, J., Turkalj, G.: Friction simulation in design of cold rolled products used in vehicle industry, Proceedings of the 6th International Scientific-Technical Conference on Internal Combustion Engines and Motor Vehicles, Plovdiv, October 13-15, 1999, pp.
  53. Turkalj, G., Brnić, J., Čanađija, M.: Non-linear stability analysis of vehicle thin-walled beam members, Proceedings of the 6th International Scientific-Technical Conference on Internal Combustion Engines and Motor Vehicles, Plovdiv, October 13-15, 1999, pp.
  54. Turkalj, G., Brnić, J.: Geometric non-linear analysis of thin-walled beams, Proceedings of the 4th International Scientific Colloquium, CAx Techniques '99, Bielefeld, Germany, Sep. 13-15, 1999, 65-272.
  55. Brnić, J., Čanađija, M., Lanc, D.: Computational inelasticity modelling in metal forming processes, Proceedings of the 4th International Scientific Colloquium, CAx Techniques '99, Bielefeld, Germany, Sep. 13-15, 1999,183-190.
  56. Turkalj, G., Brnić, J.: Basic classification of metal forming processes and their numerical simulation, Proceedings of the 2nd International Conference on Industrial Tools, Vol. 2., Maribor, Slovenia, April 18-22, 1999,  498-501.
  57. Brnić, J., Čanađija, M.: Finite element analysis of thin workpieces elastoplastic response in cold flattening process, Proceedings of the 2nd International Conference on Industrial Tools, Vol. 2., Maribor, Slovenia, April 18-22, 1999,  414-417.
  58. Brnić, J.: Finite element shear stress analysis of welded joints, Proceedings of the International Conference - Welding in Maritime Engineering, Malinska (Is. Krk), October 22.-24., 1998, pp. 231-237., Izdavač: Hrvatsko društvo za teh. zav., ISBN 953-96454-9-1, Ured. Slobodan Kralj, Zoran Kožuh.
  59. Brnić, J., Turkalj, G.: Finite elements based computed results in the plane strain rolling problem, Proceedings of the 6th International Scientific Conference – CO-MA-TECH ’98, Trnava, Slovak Republic, October 22-23, 1998,  335-339.
  60. Brnić, J., Turkalj, G.: Numerical analysis of elastic and viscoplastic failure modes of energetic service applications, Proceedings of the International Congress ˝Energy and the Environment˝, Vol. I, Opatija, October 28-30, 1998, 393-398.
  61. Brnić, J., Turkalj, G.: Load capacity determination of thin-walled beam type structures based on numerical prediction of structure stability, Proceedings of the VIIth International Conference on Numerical Methods in Continuum Mecahnics (NMCM’98), High Tatras, Slovak Republic, October 6-9, 1998, 159-164.
  62. Turkalj, G., Brnić, J.: Numerical stability analysis of thin-walled equipment members, Proceedings of the 3rd International Conference: Maintenance of Electrical Machines, Transformers and Equipment – Electric Energy Quality (EEDEEQ’98), Rovinj, October 5-7, 1998,  5-8.
  63. Brnić, J., Turkalj, G.: Numerical modeling of forming process of thin-plate workpieces used in equipment manufacturing, Proceedings of the 3rd International Conference: "Maintenance of Electrical Machines, Transformers and Equipment – Electric Energy Quality", EEDEEQ’98, Rovinj, October 5-7, 1998,  1-4.
  64. Turkalj, G., Brnić, J.: Torsional buckling analysis of special thin-walled opened cross-section columns used in vehicle design, Proceedings of the 5th International Scientific – Technical Conference on Internal Combustion Engines and Motor Vehicles, MOTAUTO '98, Vol. IV, Sofia, Bulgaria, October 14-16, 1998, 187-192.
  65. Brnić, J., Turkalj, G.: Numerical simulation of a forming process in vehicle metal-forming industry, Proceedings of the 5th International Scientific – Technical Conference on Internal Combustion Engines and Motor Vehicles, MOTAUTO '98, Vol. I, Sofia, Bulgaria, October 14-16, 1998,  65-68.
  66. Brnić, J.: Simulation of cold rolling process of thin plate workpieces, Proceedings of 4th International Conference: "Forming Technology, Tools and Machines", FORM '98, Vol. I, Brno, Czech Republic, September 15-16, 1998, pp. 37-42., ISBN 80-214-1182-1, Ed. Milan Forejt.
  67. Brnić, J.: Finite element modeling in metal forming process, Proceedings of An International Conference on Advanced Computational Methods in Engineering (ACOMEN’98), Ghent, Belgium, September 2-4, 1998, 149-153.
  68. Brnić, J.: Pressure vessel design safety based on viscoplastic material behavior, Proceedings of the 3rd International Conference on New Trends in Automation of Energetic Processes, Zlin, Czech Republic, May 19-20, 1998, pp. 56-59., ISBN 80-214-1094-9, Ed. Jaroslav Balate, T. Sysala.
  69. Turkalj, G., Brnić, J.: Numerical analysis of buckling by torsion and buckling by torsion and flexure, Proceedings of the 9th DAAAM Symposium, Vienna – Cluj-Napoca, Romania, October 22-24, 1998,  469-470.
  70. Brnić, J., Čanađija, M.: Nonlinear modeling of a special forming process, Proceedings of the 9th DAAAM Symposium, Vienna – Cluj-Napoca, Romania, October 22-24, 1998,  75-76.
  71. Brnić, J., Čanađija, M.: Computer contact pressure distribution in cold sheet rolling process, Proceedings of the 5th International Design Conference, DESIGN ´98, Dubrovnik, 1998., 127-132.
  72. Brnić, J., Turkalj, G.: Basic concept of numerical optimization model in design and manufacturing, Proceedings of the 5th International Design Conference, DESIGN ´98, Dubrovnik, 1998., 609-614.
  73. Brnić, J., Čanađija, M., Turkalj, G.: Numerical procedure basic concept of cold rolling process, Proceedings of the 8th International DAAAM Symposium: “Intelligent Manufacturing & Automation”, Dubrovnik, October 23-25, 1997,  039-040.
  74. Brnić, J., Turkalj, G., Čanađija, M.: Numerical and experimental local and global buckling analysis of opened thin-walled beam type structures, Proceedings of the 8th International DAAAM Symposium: “Intelligent Manufacturing & Automation”, Dubrovnik, October 23-25, 1997,  041-042.
  75. Brnić, J.: Numerical optimization of structures in plane strain conditions based on the prediction of viscoplastic material behaviour, Proceedings of the 7th International Symposium of Mathematics and its Applications, Timisoara – Romania, November 6-9, 1997.,  67-72.
  76. Brnić, J., Čanađija, M., Turkalj, G.: Determination of pressure vessel wall thickness based on the numerical simulation of viscoplatic material behaviour, Proceedings of the 1st International Conference UPS ’97, [Strojarski fak. Mostar & DAAAM International Vienna-Org.], Mostar, Bosna i Hercegovina, September 26-27, 1997.,  29-33.
  77. Brnić, J.: Structure members cross-sectional optimization, Proceedings of the 4th International Conference on Production Engineering, CIM’97 (Computer Integrated Manufacturing and High Speed Machining), [Hrvatska zajednica proizvodnog strojarstva i PTW Institut Technische Hochshule Darmstadt - Org.], Opatija, June 12-13, 1997., pp. D1-D7.
  78. Brnić, J., Turkalj, G.: Finite element stability analysis of thin-walled space frames in vehicle design, Proceedings of the Fourth International Scientific - Technical Conference on Internal Combustion Engines and Motor Vehicles, MOTAUTO '97, Russe, Bulgaria,October 15-17, 1997.,  31-36.
  79. Brnić, J., Turkalj, G.: Shear stress intensity analysis of different vehicle memebers using new finite elements, Proceedings of the Fourth International Scientific - Technical Conference on Internal Combustion Engines and Motor Vehicles, MOTAUTO '97, Russe, Bulgaria, October 15-17, 1997., 26-30.
  80. Brnić, J., Turkalj, G., Čanađija, M.: Numerical prediction of material behaviour in energetic systems at high temperature conditions, Proceedings of the 2nd International Symposium EEDEEQ (2. Međunarodni simpozij: dijagnostika električnih strojeva, transformatora i uređaja), [Elektrotehničko društvo Zagreb,  Verband der Elektrizitätswerke Osterreichs, Wien: Org.], Pula, September 29 – October 1, 1997.,  15-18.
  81. Brnić, J., Čanađija, M.: Computer simulation of viscoplastic materials phenomena by overlay technique using finite element method, Proceedings of the 3rd International Scientific Colloquium "CAE Techniques '97" (Computer - Aided Engineering Techniques), Rzeszow, Poland, September 24-27, 1997., 187-194.
  82. Turkalj, G., Brnić, J., Čanađija, M.: Experimental investigations and finite element procedure of thin walled local and global stability problems, Proceedings of the 2nd Congress of Croatian Society of Mechanics, Supetar - Brač, September 18-20, 1997.,  125-132.
  83. Čanađija, M., Brnić, J., Turkalj, G.: Finite element formulations for cold rolling process, Proceedings of the 2nd Congress of Croatian Society of Mechanics, Supetar - Brač, September 18-20, 1997., 305-312.
  84. Brnić, J., Čanađija, M.: Prediction of metal crrep behaviour used in building energetic systems using finite element method, Proceedings of the Worldwide ECCE Symposium (European Council of Civil Engineers): "Computers in the Practice of Building and Civial Engineering", Lahti, Finland, September 3-5, 1997.,  174-178.
  85. Brnić, J., Turkalj G., Čanađija M.: Shear stress analysis using new special general quadrilateral finite elements, Proceedings of the 3rd Euromech Solid Mechanics Conference, (Book of Abstracts), Stockholm, Sweden, August 18-22, 1997., p. 45.
  86. Brnić, J.:Optimization of the cross-sectional dimensions of structures using warping method, Proceedings of the 11th International Conference on Engineering Design (ICED 97), Tampere, Finland, August 19-21, 1997.,  627-630.
  87. Brnić, J., Čanađija, M., Turkalj, G.: Finite element modelling of creep phenomenon of different materials, Proceedings of the International Conference on Recent Advances in Metallurgical Processes (ICRAMP-97), Vol. II, Bangalore, India, July 16-19, 1997., 1091-1096.
  88. Brnić, J., Čanađija, M., Turkalj, G.: The possibility of analytical and numerical prediction of equipment material behaviour in energetic systems at special environment conditions, Proceedings of the 14th International Symposium on Heating, Refrigerating and Air Conditioning, INTERKLIMA '97, [FSB-Zagreb, FS - Ljubljana: Org.], Zagreb, April 24-25, 1997, 159-166.
  89. Brnić, J., Čanađija, M.: Numerical simulation of the time dependent effect in viscoplastic media, Proceedings of the International Conference on Industrial Tools (ICIT-97), Maribor, Slovenia, April 21-22, 1997.,  87-90.
  90. Brnić, J., Čanađija, M., Turkalj, G.: An algorithm for modelling of elasto-viscoplastic effects in energetic systems, Proceedings of the International Congress: "Energy and the Environment", Opatija, October 23-25, 1996., 217-222.
  91. Brnić, J., Čanađija M.: Numerical procedure of elasto-viscoplastic problems solution, Proceedings of the 7th International DAAAM Symposium: "Product&Manufacturing: Flexibility, Integration, Intelligence", Vienna, October 17-19, 1996.,  63-64.
  92. Brnić, J., Turkalj G.: Computational stability analysis in optimal design procedure of a special type of plane frame structure, Proceedings of the 7th International DAAAM Symposium: "Product&Manufacturing: Flexibility, Integration, Intelligence", Vienna,  October 17-19, 1996., 65-66.
  93. Sopta, L., Vuković, S., Brnić, J.: Numerical model of pressure transients in pipelines, Proceedings of the International Conference: Adriatic Coastal Zone and Subsea (ACZS), Opatija, March 1-4, 1995.,  109-119.
  94. Brnić, J.: Shear stress analysis in cross-sectional optimization of thin-walled beam-type structures, Proceedings of the 6th International DAAAM Symposium: "Inteligent Manufacturing Systems", Krakow, October 26-28, 1995., 43-44.
  95. Brnić, J., Perinić, M.: Describing of construction elements behaviour of maritime units like viscoelastic bodies, Proceedings of the International Conference: Adriatic Coastal Zone and Subsea (ACZS), Opatija, March 1-4, 1995., 162-182.
  96. Brnić, J.: Determination of the stress concentration factors by finite element method, Brnić, J., Čanađija, M.: Optimal cross-sections of the circular frames of the underwater units, Proceedings of the International Conference: Adriatic Coastal Zone and Subsea (ACZS), Opatija, March 1-4, 1995., 148-160.
  97. Brnić, J.: Pipe stress analysis like viscoelastic bodies in higher or lower operating temperature ranges, Proceedings of the 5th International Symposium on New Technologies (5th SONT), Poreč, September 25-27, 1995., 99-102.
  98. Brnić, J., Turkalj, G.: Design of maritime construction elements using limit stress analysis, Proceedings of the International Conference: Adriatic Coastal Zone and Subsea (ACZS), Opatija, March 1-4, 1995., 136-146.
  99. Brnić, J., Sopta, L.: Global approach to the marine structures optimization using finite element method, Proceedings of the International Conference: Adriatic Coastal Zone and Subsea (ACZS), Opatija, March 1-4, 1995., 121-134.
  100. Proceedings of the 1st Congress of Croatian Society of Mechanics, Pula, September 14-17, 1994., 588-596.
  101. Brnić, J.: Stress analysis of cross-section of beam elements using special finite   elements, Proceedings of the International Seminar and Exibition of the Design, Construction and Operation of the Marine Structure, Teheran, 1990., 254-262.

 

Papers published in domestic journals

  1. Brnić, J.: Elastično temeljenje strojeva i uređaja, Zbornik radova VII, Tehnički fakultet Rijeka, 1983., 1-9.
  2. Brnić, J.: Analiza naprezanja brodograđevnih i strojarskih konstrukcija specijalnim 2-D konačnim elementima, Pomorski zbornik, 27(1989), Savez društava za proučavanje i unapređenje pomorstva Jugoslavije, Rijeka, 1989., 251-277.
  3. Brnić, J.: Prilog numeričkom rješavanju analize naprezanja i deformacija brodograđevnih laminiranih nosača, Pomorski zbornik, 28 (1990), Savez društava za proučavanje i unapređenje pomorstva Jugoslavije, Rijeka, 1990., 377-354.
  4. Brnić, J.: Numeričko određivanje karakteristika poprečnih presjeka strukutrnih elementa metodom jediničnih tangencijalnih naprezanja, Pomorski zbornik, 29(1991), Savez društava za proučavanje i unapređenje pomorstva, Rijeka, 1991., 213-224.
  5. Brnić, J.: Prilog numeričkoj analizi tankostijenih struktura, Pomorski zbornik, 30 (1992), Savez društava za proučavanje i unapređenje pomorstva, Rijeka, 1992., 407-416.
  6. Brnić, J.: Određivanje krutosti elemenata elastičnog zavješenja rasvjetnih tijela na plovnim objektima, Pomorski zbornik, 31 (1993), Društvo za proučavanje i unapređenje pomorstva Republike Hrvatske, Rijeka, 1993., 397-407.
  7. Brnić, J.: Prilog matematičkoj formulaciji viskoelastičnih modela, Zbornik Tehničkog fakulteta Rijeka, 13 (1993), Rijeka, 1993., 21-26.
  8. Brnić, J., Turkalj, G.: Algorithm for plane frame structures initial stability analysis based on the finite element method, Engineering Review, Technical Faculty, University of Rijeka, Rijeka, 1995., pp. 1-8.
  9. Brnić, J.: A new criterion for treatment of cross-sections of structure members as thin-walled structures or thick-walled structures, Engineering Review, Technical Faculty, University of Rijeka, Rijeka, 1996., pp. 1-5.

Papers in Proceedings of domestic scientific meetings

  1. Brnić, J.: Prilog analizi vibracija ravninskih konstrukcija, Zbornik VII simpozija Teorija i praksa brodogradnje (in memoriam prof. Leopold Sorta), Pula, 1986., 166-178.
  2. Brnić, J., Ruman, R., Tijanić, M.: O vibracijama pomorskih konstrukcija, Zbornik sažetaka radova: Savjetovanje - problemi čvrstoće konstrukcije objekata morske tehnologije, Zagreb, travanj 14-17, 1987, ref. 11
  3. Brnić, J., Ruman, R., Traven, F.: Prilog rješavanju stabilnosti ojačanih ploča, Zbornik sažetaka radova: Savjetovanje - problemi čvrstoće konstrukcije objekata morske tehnologije, Zagreb, travanj 14-17, 1987, ref. 11
  4. Brnić, J.: A contribution to the mathematical modelling in the shaft optimal design process, Proceedings of the 4th Symposium - Design '96, Vol. 2, Opatija, May 16-17, 1996., pp. 271-275.
  5. Brčić, M., Čanađija, M., Brnić, J.: Strukturni model jednostruke ugljične nanocijevi, Zbornik radova Prvog susreta Hrvatskog društva za mehaniku, Rijeka, 26. Lipanj 2007. pp. 43-48.
  6. Čanađija, M., Brnić, J., Brčić, M., Vukelić, G.: Model neasocijativne termoplastičnosti pri velikim deformacijama , Zbornik radova Prvog susreta Hrvatskog društva za mehaniku, Rijeka, 26. Lipanj 2007. pp. 49-54
  7. Lanc, D., Turkalj, G., Brnić, J., Vizentin, G.: Numerički model za analizu stabilnosti materijalno nelinearnih okvira, Zbornik radova Prvoga susreta Hrvatskoga društva za mehaniku / Čanađija, Marko (ur.), Rijeka : Hrvatsko društvo za mehaniku, 2007. 133-13
  8. Čanađija, M., Brnić, J., Brčić, M., Vukelić, G., Kršćanski, S.: Disipacijski modeli u plastičnosti, Zbornik radova Drugog susreta Hrvatskoga društva za mehaniku / Marović, Pavao ; Galić, Mirela ; Krstulović, Lovre (ur.), Split : Hrvatsko društvo za mehaniku, 2008. 1-6.
  9. Brčić, M., Čanađija, M., Brnić, J.: Modeliranje interakcija matrice nanokompozita i nanocijevi, Zbornik radova Trećeg susreta Hrvatskog društva za mehaniku / Mirjana Bošnjak-Klečina (ur.), Osijek : Hrvatsko društvo za mehaniku, 2010. 1-6.
  10. Čanađija, M., Munjas, N., Brnić, J.: Formulacija mehanike oštećenja pri konačnim elastoplastičnim deformacijama , Zbornik radova Četvrtog susreta Hrvatskog društva za mehaniku / Živić, Marija (ur.), Slavnoski Brod : Hrvatsko društvo za mehaniku, 2011. 33-36



  


updated: 04/25;26/12
date: 06/10/11
web editor: D. Torbica

  1. Brnic J.,Turkalj G., Niu J., Canadija M., Lanc D.: Significance of Experimental data in the design of structure made from 1.4057 steel, Journal of Wuhan University of Technology- Mater  Sci Ed, 29 (2014),  1, 131-136.
  2. Čanađija, M., Brčić, M., Brnić, J.: A Finite element model for thermal dilatation of carbon nanotubes, Reviews on advanced materials science, 33 (2013), 1,1-6.
  3. Brnić, J., Turkalj, G.,  Lanc, D., Čanadija, M., Brčić, M.,  Vukelic, G., Munjas, N.: Testing and Analysis of X39CrMo17-1 Steel Properties, Construction and Building Materials, 44 (2013), 293-301.
  4. Brnić, J., Čanađija, M., Turkalj, G., Lanc, D., Pepelnjak, T., Barišić, B., Vukelić, G., Brčić, M.:Tool Material Behavior at  Elevated Temperatures, Materials and Manufacturing Processes, 24 (2009), 1-5.
  5. Vukelić, G., Brnić, J., Čanađija, M., Turkalj, G., Brčić, M., Pešić, I.: Two- Dimensional Numerical Modeling of Pipelines with Axial Flaws, TRANSACTIONS of FAMENA, 32(2008), 1,1-7.
  6. Brnić, J., Čanađija, M., Turkalj, G., Lanc, D., Kršćanski, S.: Response of AISI 304 steel under uniaxial stress at elevated temperatures, TRANSACTIONS of FAMENA, 32(2008), 2, 3-10.
  7. Lanc, D., Turkalj, G., Brnić, J., Vizentin, G.: Numerički model za analizu stabilnosti materijalno nelinearnih okvira, Zbornik radova Prvoga susreta Hrvatskoga društva za mehaniku / Čanađija, Marko (ur.), Rijeka : Hrvatsko društvo za mehaniku, 2007. 133-13
  8. Čanađija, M., Brnić, J., Brčić, M., Vukelić, G., Kršćanski, S.: Disipacijski modeli u plastičnosti, Zbornik radova Drugog susreta Hrvatskoga društva za mehaniku / Marović, Pavao ; Galić, Mirela ; Krstulović, Lovre (ur.), Split : Hrvatsko društvo za mehaniku, 2008. 1-6.
  9. Brčić, M., Čanađija, M., Brnić, J.: Modeliranje interakcija matrice nanokompozita i nanocijevi, Zbornik radova Trećeg susreta Hrvatskog društva za mehaniku / Mirjana Bošnjak-Klečina (ur.), Osijek : Hrvatsko društvo za mehaniku, 2010. 1-6.
  10. Čanađija, M., Munjas, N., Brnić, J.: Formulacija mehanike oštećenja pri konačnim elastoplastičnim deformacijama , Zbornik radova Četvrtog susreta Hrvatskog društva za mehaniku / Živić, Marija (ur.), Slavnoski Brod : Hrvatsko društvo za mehaniku, 2011. 33-36

 


updated: 09/20/17 ; 08/11/17 ; 10/28/15 ; 10/27/15
edited by: D. Torbica